Mercedes-benz 2013 E Class Coupe User Manual download pdf (Page 369)

X

Turn the SmartKey to position 2 in the

ignition lock.

X

Shift the automatic transmission to

position N.

As soon as the vehicle has been loaded:

X

Prevent the vehicle from rolling away by

applying the parking brake.

X

Shift the automatic transmission to

position P.

X

Turn the SmartKey to position 0 in the

ignition lock and remove the SmartKey

from the ignition lock.

X

Secure the vehicle.

Notes on 4MATIC vehicles

!

Vehicles with 4MATIC must not be towed

with either the front or the rear axle raised,

as doing so will damage the transmission.

If the vehicle has transmission damage or

damage to the front or rear axle, have it

transported on a transporter or trailer.

In the event of damage to the electrical

system

If the battery is defective, the automatic

transmission will be locked in position P. To

shift the automatic transmission to position

N, you must provide power to the vehicle's

electrical system in the same way as when

jump-starting (Y page 362).

Have the vehicle transported on a transporter

or trailer.

Tow-starting (emergency engine

starting)

!

Vehicles with automatic transmission

must not be started by tow-starting. This

could otherwise damage the transmission.

You can find information on "Jump-starting"

under (Y page 362).

Fuses

Important safety notes

G

WARNING

If you manipulate or bridge a faulty fuse or if

you replace it with a fuse with a higher

amperage, the electric cables could be

overloaded. This could result in a fire. There

is a risk of an accident and injury.

Always replace faulty fuses with the specified

new fuses having the correct amperage.

!

Only use fuses that have been approved

for Mercedes-Benz vehicles and which

have the correct fuse rating for the system

concerned. Otherwise, components or

systems could be damaged.

The fuses in your vehicle serve to close down

faulty circuits. If a fuse blows, all the

components on the circuit and their functions

stop operating.

Blown fuses must be replaced with fuses of

the same rating, which you can recognize by

the color and value. The fuse ratings are listed

in the fuse allocation chart.

If a newly inserted fuse also blows, have the

cause traced and rectified at a qualified

specialist workshop, e.g. an authorized

Mercedes-Benz Center.

Before changing a fuse

Observe the important safety notes

(Y page 367)

X

Secure the vehicle against rolling away

(Y page 182).

X

Switch off all electrical consumers.

X

Turn the SmartKey to position 0 in the

ignition lock and remove it (Y page 159).

or

X

On vehicles with KEYLESS-GO, make sure

the ignition is switched off (Y page 159).

All indicator lamps in the instrument cluster

must be off.

Fuses

367

Breakdown assistance

Z

1 2 ... 364 365 366 367 368 369 370 371 372 373 374 ... 431 432

Comments to this Manuals

No comments