Mercedes-benz 2013 E Class Coupe User Manual download pdf (Page 385)

and must be corrected at the next

opportunity.

R

If the Check Tires message appears in the

multifunction display, the tire pressure in

one or more tires has dropped significantly

and the tires must be checked.

R

If the Warning Tire Malfunction

message appears in the multifunction

display, the tire pressure in one or more

tires has dropped suddenly and the tires

must be checked.

Observe the instructions and safety notes in

the display messages in the "Tires" section

(Y page 280).

i

If the wheel positions on the vehicle are

rotated, the tire pressures may be

displayed for the wrong positions for a

short time. This is rectified after a few

minutes of driving, and the tire pressures

are displayed for the correct positions.

Restarting the tire pressure monitor

When you restart the tire pressure monitor,

all existing warning messages are deleted and

the warning lamps go out. The monitor uses

the currently set tire pressures as the

reference values for monitoring. In most

cases, the tire pressure monitor will

automatically detect the new reference

values after you have changed the tire

pressure. However, you can also define

reference values manually as described here.

The tire pressure monitor then monitors the

new tire pressure values.

X

Set the tire pressure to the value

recommended for the corresponding

driving situation on the Tire and Loading

Information placard on the driver's side

B-pillar (Y page 376).

Additional tire pressure values for different

loads can also be found on the tire pressure

table on the inside of the fuel filler flap

(Y page 376).

X

Make sure that the tire pressure is correct

on all four wheels.

X

Make sure that the SmartKey is in position

2 in the ignition lock.

X

Press the = or ; button on the

steering wheel to select the Service

menu.

X

Press the 9 or : button to select

Tire Pressure.

X

Press the a button.

The multifunction display shows the

current tire pressure for the individual tires

or the Tire pressures will be

displayed after driving a few

minutes message.

X

Press the : button.

The Use Current Pressures as New

Reference Values message appears in

the multifunction display.

If you wish to confirm the restart:

X

Press the a button.

The Tire Press. Monitor Restarted

message appears in the multifunction

display.

After driving for a few minutes, the system

checks whether the current tire pressures

are within the specified range. The new tire

pressures are then accepted as reference

values and monitored.

If you wish to cancel the restart:

X

Press the % button.

The tire pressure values stored at the last

restart will continue to be monitored.

Loading the vehicle

Instruction labels for tires and loads

G

WARNING

Overloaded tires can overheat, causing a

blowout. Overloaded tires can also impair the

steering and driving characteristics and lead

to brake failure. There is a risk of accident.

Observe the load rating of the tires. The load

rating must be at least half of the GAWR of

Loading the vehicle

383

Wheels and tires

Z

1 2 ... 380 381 382 383 384 385 386 387 388 389 390 ... 431 432

Comments to this Manuals

No comments