Mercedes-benz 2013 E Class Coupe User Manual download pdf (Page 414)

Stowing a used collapsible spare

wheel

!

Only place the collapsible spare wheel in

the vehicle when it is dry. Otherwise,

moisture may get into the vehicle.

Take the following steps to stow a used

collapsible spare wheel. It will not otherwise

install into the spare wheel well. Mercedes-

Benz recommends that you have this work

performed at a qualified specialist workshop,

e.g. at an authorized Mercedes-Benz Center.

X

Unscrew the valve cap from the valve.

X

Use the back of the valve cap to unscrew

the valve insert from the valve and release

the air.

i

Fully deflating the tires can take a few

minutes.

X

Screw the valve insert back into the valve.

X

Screw the valve cap back on.

X

Remove the protective sheet from the

vehicle tool kit and pull it over the

collapsible spare wheel.

X

Stow the collapsible spare wheel in the

emergency spare wheel well under the

trunk.

Inflating the collapsible spare wheel

!

Inflate the collapsible spare wheel using

the tire inflation compressor before

lowering the vehicle. The wheel rim could

otherwise be damaged.

!

Do not operate the tire inflation

compressor for longer than eight minutes

at a time without a break. It may otherwise

overheat.

The tire inflation compressor can be

operated again once it has cooled down.

X

Mount the collapsible spare wheel as

described (Y page 395).

The collapsible spare wheel must be

mounted before it is inflated.

X

Pull connector ? and the air hose out of

the housing.

X

Remove the cap from the valve on the

collapsible spare wheel.

X

Screw union nut : on the air hose onto the

valve.

X

Make sure on/off switch A of the tire

inflation compressor is set to 0.

X

Insert connector ? into the cigarette

lighter socket or into a 12 V socket in your

vehicle.

Observe the notes on the cigarette lighter

(Y page 319). Observe the notes on

sockets (Y page 320).

X

Turn the SmartKey to position 1 in the

ignition lock (Y page 159).

X

Press on/off switch A on the tire inflation

compressor to I.

The tire inflation compressor is switched

on. The tire is inflated. The tire pressure is

shown on pressure gauge =.

X

Inflate the tire to the specified tire

pressure.

The specified tire pressure is printed on the

yellow label of the emergency spare wheel.

X

When the specified tire pressure has been

reached, press on/off switch A on the

electric air pump to 0.

The tire inflation compressor is switched

off.

412

Emergency spare wheel

Wheels and tires

1 2 ... 409 410 411 412 413 414 415 416 417 418 419 ... 431 432

Comments to this Manuals

No comments