Mercedes-benz 2013 C Class Coupe User Manual download pdf (Page 361)

X

Using wheel wrench :, loosen the bolts on

the wheel you wish to change by about one

full turn. Do not unscrew the bolts com-

pletely.

The jacking points are located just behind the

front wheel arches and just in front of the rear

wheel arches (arrows).

X

Position jack = at jacking point ;.

X

Make sure that the base of the jack is posi-

tioned vertically under the jacking point.

X

Turn crank ? clockwise until jack = sits

completely on jacking point ; and the

base of the jack lies evenly on the ground.

X

Turn crank ? until the tyre is raised a max-

imum of 3 cm off the ground.

Removing a wheel

!

Do not place wheel bolts in sand or dirt.

The threads of the wheel bolts and wheel

hubs could otherwise be damaged when

the bolts are tightened.

X

Unscrew the wheel bolts.

X

Remove the wheel.

Fitting a new wheel

G

WARNING

Oiled or greased wheel bolts or damaged

wheel bolts/hub threads can cause the wheel

bolts to come loose. As a result, you could

lose a wheel while driving. There is a risk of

accident.

Never oil or grease wheel bolts. In the event

of damage to the threads, contact a qualified

specialist workshop immediately. Have the

damaged wheel bolts or hub threads

replaced/renewed. Do not continue driving.

Fitting a wheel

359

Wheels and tyres

Z

1 2 ... 356 357 358 359 360 361 362 363 364 365 366 ... 387 388

Comments to this Manuals

No comments