Mercedes-benz 2013 C Class Coupe User Manual download pdf (Page 221)

Ã position, the daytime driving lights are

switched on automatically when the engine is

running. When it is dark, the side lamps and

the dipped-beam headlamps are switched on

automatically.

On vehicles with daytime driving lamps, the

factory setting is on.

If you want to change the setting for the Day.

driv. lights: function, you have to turn

the key in the ignition lock to position 1.

X

Press the V button on the steering

wheel repeatedly until the Day. driv.

lights: menu appears.

You will see the selected setting: on or

off.

X

Press the W or X button to change

the setting.

Time/date

i

Depending on your vehicle's equipment,

the time can be set using the on-board

computer or the audio system/COMAND,

see the separate operating instructions.

X

Press the V button on the steering

wheel repeatedly until the "Time/date"

menu appears.

X

To set: use the C button to select the

display you want to change: hour, minutes,

day, month, year.

X

Press W or X to set the selected dis-

play.

X

To save: press the C button.

The next display is selected.

Displays and operation (12-button

multifunction steering wheel)

Instrument cluster lighting

The lighting in the instrument cluster, in the

displays and the controls in the vehicle inte-

rior can be adjusted using the brightness con-

trol knob.

The brightness control knob is located on the

bottom left of the instrument cluster

(Y page 37).

X

Turn the brightness control knob clockwise

or anti-clockwise.

If the light switch is set to Ã, T or

L, the brightness is dependant upon

the brightness of the ambient light.

i

The light sensor in the instrument cluster

automatically controls the brightness of

the multifunction display.

In daylight, the displays in the instrument

cluster are not illuminated.

Coolant temperature gauge

G

WARNING

If you open the bonnet while the engine is

overheating or while there is a fire in the

engine compartment, you could come into

contact with hot gases or other leaking

service products. There is a danger of injury.

Allow an overheating engine to cool down

before opening the bonnet. If there is a fire in

the engine compartment, leave the bonnet

closed and notify the fire brigade.

The coolant temperature gauge is in the

instrument cluster on the left-hand side.

Under normal operating conditions and with

the specified coolant level, the coolant tem-

perature may rise to 120 †.

At high outside temperatures and when driv-

ing uphill, the coolant temperature may rise

to the end of the scale.

Rev counter

The red band in the rev counter indicates the

engine's overrevving range.

!

Do not drive in the overrevving range.

Doing so will damage the engine.

The fuel supply is interrupted to protect the

engine when the red band is reached.

Displays and operation (12-button multifunction steering wheel)

219

On-board computer and displays

Z

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 387 388

Comments to this Manuals

No comments