Mercedes-benz 2013 C Class Coupe User Manual download pdf (Page 99)

X

Touch recessed sensor surface : on the

door handle until the side windows and the

panorama sliding sunroof are fully closed.

i

Make sure you only touch recessed sen-

sor surface :.

X

Make sure that all the side windows and the

panorama sliding sunroof are closed.

On vehicles with a panorama sliding sunroof:

X

Touch recessed sensor surface : on the

door handle again until the roller sunblind

of the panorama sliding sunroof closes.

X

To interrupt convenience closing:

release recessed sensor surface : on the

door handle.

Resetting the side windows

You must reset each side window if a side

window can no longer be closed fully.

X

Close all doors.

X

Turn the key to position 1 or 2 in the ignition

lock.

X

Pull the corresponding switch on the door

control panel until the side window is com-

pletely closed (Y page 95).

X

Hold the switch for an additional second.

If the side window opens again slightly:

X

Immediately pull the corresponding switch

on the door control panel until the side win-

dow is completely closed (Y page 95).

X

Hold the switch for an additional second.

X

If the corresponding side window remains

closed after the button has been released,

the side window has been reset correctly.

If this is not the case, repeat the steps

above again.

Problems with the side windows

Problem: a side window cannot be closed

because it is blocked by objects, e.g.

leaves in the window guide.

X

Remove the objects.

X

Close the side window.

Problem: a side window cannot be closed

and you cannot see the cause.

G

WARNING

If you close a side window again immediately

after it has been blocked or reset, the side

window closes with increased or maximum

force. The reversing function is then not

active. Parts of the body could be trapped in

the closing area in the process. This poses an

increased risk of injury or even fatal injury.

Make sure that no parts of the body are in the

closing area. To stop the closing process,

release the switch or push the switch again to

reopen the side window.

If a side window is obstructed during closing

and reopens again slightly:

X

Immediately after the window blocks, pull

the corresponding switch again until the

side window has closed.

The side window is closed with increased

force.

Side windows

97

Opening and closing

Z

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 387 388

Comments to this Manuals

No comments