Mercedes-benz 2013 C Class Coupe User Manual download pdf (Page 357)

short time. This is rectified after a few

minutes of driving and the tyre pressures

are displayed for the correct positions.

Restarting the tyre pressure monitor

When you restart the tyre pressure monitor,

all existing warning messages are deleted and

the warning lamps go out. The monitor uses

the currently set tyre pressures as the refer-

ence values for monitoring. In most cases, the

tyre pressure monitor will automatically

detect the new reference values after you

have changed the tyre pressure. However,

you can also define reference values man-

ually as described here. The tyre pressure

monitor then monitors the new tyre pressure

values.

i

You will find an overview of the menus on

(Y page 222).

X

Use the table on the inside of the fuel filler

flap to ensure that the tyre pressure is set

correctly in all four tyres for the current

operating conditions.

Also observe the notes in the section on

tyre pressures (Y page 350).

X

Make sure that the key is in position 2 in

the ignition lock.

X

Press the = or ; button on the steer-

ing wheel to select the Service menu.

X

Press the 9 or : button to select

Tyre pressure.

X

Press the a button.

The multifunction display shows the cur-

rent tyre pressure for the individual tyres or

the Tyre pressures will be dis‐

played after a few minutes of driv‐

ing message.

X

Press the : button.

The Use current pressures as new

reference values message appears in

the multifunction display.

If you wish to confirm the restart:

X

Press the a button.

The Tyre press. monitor restarted

message appears in the multifunction dis-

play.

After you have driven for a few minutes, the

system checks whether the current tyre

pressures are within the specified range.

The new tyre pressures are then accepted

as reference values and monitored.

If you wish to cancel the restart:

X

Press the % button.

The tyre pressure values stored at the last

restart will continue to be monitored.

Radio type approval for the tyre pres-

sure monitor

In certain countries, a radio type approval for

the tyre pressure monitor may be required.

The radio type approval number for the tyre

pressure monitor can be found online at:

http://www.mercedes-benz.de/

betriebsanleitung.

Country Radio type approval number

Brazil 1489-10-4415

Model: MRXMERCTX1

Dubai TRA, Registered NO:

0016161/08

TRA, Registered NO

ER0076990/11

Dealer-NO: DA0047074/10

Morocco MR5526 ANRT 2010/

27/04/2010

MR6706 ANRT 2011/

17/11/2011

Philip-

pines

ESD-1105558C

Serbia И 011 12

Tyre pressure

355

Wheels and tyres

Z

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 387 388

Comments to this Manuals

No comments