Mercedes-benz 2013 C Class Coupe User Manual download pdf (Page 205)

R

the distance to the vehicle in front is too

small and the lane markings thus cannot be

detected

R

the lane markings change quickly, e.g.

lanes branch off, cross one another or

merge

R

the road is narrow and winding

R

there are highly variable shade conditions

on the road

Activating Lane Keeping Assist

X

Activate Lane Keeping Assist using the on-

board computer; to do so, select Stand‐

ard or Adaptive(Y page 230).

If you drive at speeds above 60 km/h and

lane markings are detected, the lines in the

assistance graphic display (Y page 228)

are shown in green. Lane Keeping Assist is

ready for use.

Standard

If Standard is selected, no warning vibration

occurs if:

R

you have switched on the turn signals. In

this case, the warnings are suppressed for

a certain period of time.

R

a driving safety system intervenes, such as

ABS, BAS or ESP

®

.

Adaptive

When Adaptive is selected, no warning vibra-

tion occurs if:

R

you have switched on the turn signals. In

this case, the warnings are suppressed for

a certain period of time.

R

a driving safety system intervenes, such as

ABS, BAS or ESP

®

.

R

you accelerate hard, e.g. kickdown.

R

you brake hard.

R

you steer actively, e.g. swerve to avoid an

obstacle or change lane quickly.

R

you cut the corner on a sharp bend.

In order that you are warned only when nec-

essary and in good time if you cross the lane

marking, the system recognises certain con-

ditions and warns you accordingly.

The warning vibration occurs earlier if:

R

you approach the outer lane marking on a

bend.

R

the road has very wide lanes, e.g. a motor-

way.

R

the system recognises solid lane markings.

The warning vibration occurs later if:

R

the road has narrow lanes.

R

you cut the corner on a bend.

Towing a trailer

If you attach a trailer, make sure that you have

correctly established the electrical connec-

tion. This can be accomplished by checking

the trailer lighting.

Active Driving Assistance package

General notes

The Active Driving Assistance package con-

sists of DISTRONIC PLUS (Y page 179), Active

Blind Spot Assist (Y page 203) and Active

Lane Keeping Assist (Y page 206).

Active Blind Spot Assist

General notes

Active Blind Spot Assist uses a radar sensor

system to monitor the area to the sides of

your vehicle which are behind the driver. A

warning display in the exterior mirrors draws

your attention to vehicles detected in the

monitored area. If you then switch on the cor-

responding turn signal to change lanes, you

will also receive an optical and audible colli-

sion warning. If a risk of side impact is detec-

ted, corrective braking may help you avoid a

collision. To support the course-correcting

brake application, Active Blind Spot Assist

also uses the forward-facing radar sensor sys-

tem. The space available in the direction of

travel as well as to the side of the vehicle is

evaluated before a course-correcting braking

application is performed.

Driving systems

203

Driving and parking

Z

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 387 388

Comments to this Manuals

No comments