Mercedes-Benz 2008 ML 550 Operator's Manual download pdf (Page 484)

483

Practical hints

Flat tire

Screw-type jack (example illustration)

Scissors-type jack (example illustration)

왘 Vehicles with screw-type jack: Turn

crank 4 clockwise until jack 3 is fully

seated in take-up bracket 2 and the

jack base evenly meets the ground.

왘 Vehicles with scissors-type jack:

Turn ratchet 4 up and down until

jack 3 is fully seated in take-up

bracket 2 and the jack base evenly

meets the ground.

왘 Continue to turn crank/ratchet 4

until the wheel is a maximum of 1.2 in

(3 cm) from the ground.

Removing the wheel

1 Alignment bolt

왘 Unscrew upper-most wheel bolt and

remove it.

왘 Replace this wheel bolt with alignment

bolt 1 supplied with the tool kit

(

컄 page 448).

왘 Remove the remaining wheel bolts.

왘 Remove the wheel.

!

Do not place wheel bolts in sand or dirt. This

could result in damage to the bolts and wheel

hub threads.

1 2 ... 479 480 481 482 483 484 485 486 487 488 489 ... 560 561

Comments to this Manuals

No comments