Mercedes-Benz 2008 ML 550 Operator's Manual download pdf (Page 48)

47

Getting started

Adjusting

With the easy-entry/exit feature activated,

the steering wheel will return to its last set

position when you

앫 close the driver’s door with the ignition

switched on

or

앫 insert the SmartKey into the starter

switch or press the KEYLESS-GO*

start/stop button (

컄 page 41) once

with the driver’s door closed

With the easy-entry/exit feature activated,

the steering wheel tilts upwards when you

앫 remove the SmartKey from the starter

switch

or

앫 open the driver’s door with the

SmartKey in starter switch position 0

or 1 or the KEYLESS-GO* start/stop

button in position 1 (

컄 page 41)

Steering wheel adjustment, manual

앫 Press one of the stored position

buttons* or memory button M*

(

컄 page 133).

Do not leave children unattended in the ve-

hicle, or with access to an unlocked vehicle.

Children could open the driver’s door and

unintentionally activate the easy-entry/exit

feature, which could result in an accident

and/or serious personal injury.

i

The last set steering wheel position is stored

when

앫 the ignition is switched off (컄 page 39)

앫 the position is stored in memory

(

컄 page 133)

i

If the current position for the steering wheel

is in the uppermost tilt position, the steering

wheel will no longer be able to move upward

when the easy-entry/exit feature is activated.

The adjustment procedure is briefly interrupted,

when the engine is started.

Warning! G

Let the system complete the adjustment

procedure before setting the vehicle in mo-

tion. All steering wheel adjustment must be

completed before setting the vehicle in mo-

tion. Driving off with the steering wheel still

adjusting could cause the driver to lose con-

trol of the vehicle.

Warning! G

Only adjust the steering wheel with the vehi-

cle at a standstill and make sure the steer-

ing wheel is securely locked in place before

driving off.

컄컄

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 560 561

Comments to this Manuals

No comments