Mercedes-Benz 2008 ML 550 Operator's Manual download pdf (Page 497)

496

Practical hints

Battery

왘 Connect the positive lead to the posi-

tive terminal and fasten it’s cover

(

컄 page 494).

왘 Connect the negative lead to the nega-

tive terminal (

컄 page 494).

Charging the battery

If the battery is discharged, the battery can

be charged using the jump-start contacts

located in the engine compartment

(

컄 page 498).

왘 Charge the battery in accordance with

the instructions of the battery charger

manufacturer.

Batteries contain materials that can harm

the environment if disposed of improperly.

Large 12-volt storage batteries contain

lead. Recycling of batteries is the preferred

method of disposal. Many states require

sellers of batteries to accept old batteries

for recycling.

!

Never invert the terminal connections!

i

The following procedures must be carried

out following any interruption of battery power

(e.g. due to reconnection):

앫 Set the clock (컄 page 169).

Vehicles with COMAND system with naviga-

tion module*: Time and date are set auto-

matically.

앫 Synchronize the door windows

(

컄 page 237).

앫 Synchronize the power tilt/sliding sunroof

(

컄 page 242).

앫 Synchronize the power folding exterior rear

view mirrors* (

컄 page 200).

Warning! G

Never charge a battery while still installed in

the vehicle unless the accessory battery

charge unit approved by Mercedes-Benz is

being used. Gases may escape during charg-

ing and cause explosions that may result in

paint damage, corrosion or personal injury.

An accessory battery charge unit specially

adapted for Mercedes-Benz vehicles and

tested and approved by Mercedes-Benz is

available, permitting the charging of the

battery in its installed position. Contact an

authorized Mercedes-Benz Light Truck

Center for information and availability.

Charge battery in accordance with the

separate instructions for the accessory

battery charger.

컄컄

1 2 ... 492 493 494 495 496 497 498 499 500 501 502 ... 560 561

Comments to this Manuals

No comments