102
Safety and Security
Driving safety systems
Switching off the ESP
®
To improve the vehicle’s traction, switch
off the ESP
®
in driving situations where it
would be advantageous to have the drive
wheels spin and thus cut into surfaces for
better grip such as:
앫 when driving with snow chains
앫 in deep snow
앫 in sand or gravel
When you switch off the ESP
®
앫 the ESP
®
does not stabilize the vehicle
앫 the engine output is not limited, which
allows the drive wheels to spin and
thus cut into surfaces for better grip
앫 the 4-ETS will still apply the brake to a
spinning wheel
앫 the ESP
®
continues to operate when
you are braking
앫 you cannot activate the cruise control
앫 the cruise control switch off if currently
activated
The ESP
®
switch is located on the upper
part of the center console.
1 ESP
®
switch
왘 With the engine running, press ESP
®
switch 1.
The ESP
®
warning lamp v in the
instrument cluster comes on.
The ESP
®
is deactivated.
Warning! G
The ESP
®
should not be switched off during
normal driving other than in the circum-
stances described below. Disabling of the
system will reduce vehicle stability in stan-
dard driving maneuvers.
Do not switch off the ESP
®
when a spare
wheel is mounted.
Warning! G
Switch on the ESP
®
immediately if the afore-
mentioned circumstances do not apply any-
more. Otherwise the ESP
®
will not stabilize
the vehicle when it is starting to skid or a
wheel is spinning.
i
When the ESP
®
is switched off and one or
more drive wheels are spinning, the ESP
®
warning lamp v in the instrument cluster
flashes. However, the ESP
®
will then not
stabilize the vehicle.
Comments to this Manuals