Mercedes-benz 2004 E 320 User Manual download pdf (Page 283)

283

Operation

Engine compartment

Checking engine oil level

When checking the oil level the vehicle

must

앫 be parked on level ground

앫 be at normal operating temperature

앫 have been stationary for at least five

minutes with the engine turned off

To check the engine oil level via the multi-

function display, do the following:

왘 Turn the SmartKey in the starter switch

to position 2 or press the KEYLESS-GO

start/stop button* twice.

The standard display (

컄 page 134) should

appear in the multifunction display.

왘 Press button k or j, on the

steering wheel until the following

message is seen in the multifunction

display:

Engine oil level - Measuring now!

Measurement correct only if veh.

level

One of the following messages will

subsequently appear in the indicator:

앫

Engine oil level ok

앫

Add 1.0 qt. to reach max. oil

level!

(Canada:

1.0 liter

)

앫

Add 1.5 qts. to reach max. oil

level!

(Canada:

1.5 liters

)

앫

Add 2.0 qts. to reach max. oil

level!

(Canada: 2

.0 liters

)

왘 If necessary, add engine oil.

For adding engine oil see (

컄 page 284).

More information on engine oil can be

found in the “Technical data” section

(

컄 page 400) and (컄 page 403).

Other display messages

If the SmartKey or KEYLESS-GO start/stop

button* is not in position 2, the following

message will appear:

Turn on ignition

to see engine oil level!

왘 Switch on the ignition.

If you see the message:

Observe waiting period

i

If you want to interrupt the checking

procedure, press the k or j

button on the multifunction steering

wheel.

1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 441 442

Comments to this Manuals

No comments