360
Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement 앫 Use only 12 volt bulbs of the same type
and with the specified watt rating.
앫 Switch lights off before changing a bulb
to prevent short circuits.
앫 Always use a clean lint-free cloth when
handling bulbs.
앫 Your hands should be dry and free of oil
and grease.
앫 If the newly installed bulb does not light
up, visit an authorized Mercedes-Benz
Center.
앫 Have the LEDs and bulbs for the follow-
ing lamps replaced by an authorized
Mercedes-Benz Center:
앫 Additional turn signal lamps in the
exterior rear view mirrors
앫 High mounted brake lamp
앫 Bi-Xenon* lamps
앫 Front fog lamps
Lamp Type
7 High mounted brake
lamp
LED
8 Brake, tail, parking,
standing, backup lamps
and turn signal lamps.
Rear fog lamp (driver's
side).
HiP
LED*
9 License plate lamps C 5 W
Warning! G
Keep bulbs out of reach of children.
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Halogen lamps contain pressurized gas. A
bulb can explode if you:
앫 touch or move it when hot
앫 drop the bulb
앫 scratch the bulb
Wear eye and hand protection.
Because of high voltage in Bi-Xenon* lamps,
it is dangerous to replace the bulb or repair
the lamp and its components. We recom-
mend that you have such work done by a
qualified technician.
Comments to this Manuals