Mercedes-Benz 2004 CLK-Class Operator's Manual download pdf (Page 383)

383

Practical hints

Flat tire

Mounting the new wheel

1 Wheel bolt for light alloy rims

2 Wheel bolt for Minispare wheel or other

steel rims (located in trunk with spare

wheel)

왘 Clean contact surfaces of wheel and

wheel hub.

왘 Guide the spare wheel onto the align-

ment bolt and push it on.

왘 Insert wheel bolts and tighten them

slightly.

!

Wheel bolts 2 must be used when

mounting the Minispare wheel. The use

of any wheel bolts other than wheel

bolts 2 for the Minispare will physical-

ly damage the vehicle's brakes.

!

To avoid paint damage, place wheel flat

against hub and hold it there while in-

stalling first wheel bolt.

Warning! G

Always replace wheel bolts that are dam-

aged or rusted.

Never apply oil or grease to wheel bolts.

Damaged wheel hub threads should be re-

paired immediately. Do not continue to drive

under these circumstances! Contact an au-

thorized Mercedes-Benz Center or call

Roadside Assistance.

Incorrect wheel bolts or improperly tight-

ened wheel bolts can cause the wheel to

come off. This could cause an accident.

Make sure to use the correct wheel bolts.

1 2 ... 378 379 380 381 382 383 384 385 386 387 388 ... 463 464

Comments to this Manuals

No comments