Mercedes-Benz 2004 CLK-Class Operator's Manual download pdf (Page 382)

382

Practical hints

Flat tire

2 Jack

3 Take-up bracket

왘 Place jack 2 on firm ground.

왘 Position jack 2 under take-up

bracket 3 so that it is always vertical

(plumb-line) as seen from the side,

even if the vehicle is parked on an in-

cline.

왘 Jack up the vehicle until the wheel is a

maximum of 1.2 in (3 cm) from the

ground. Never start engine while vehi-

cle is raised.

Removing the wheel

1 Alignment bolt

왘 Unscrew upper-most wheel bolt and re-

move.

왘 Replace this wheel bolt with alignment

bolt 1 supplied in the tool kit.

왘 Remove the remaining bolts.

왘 Remove the wheel.

Warning! G

The jack is intended only for lifting the vehi-

cle briefly for wheel changes. It is not suited

for performing maintenance work under the

vehicle.

앫 Never start the engine when the vehicle

is raised.

앫 Never lie down under the raised vehicle.

!

Do not place wheel bolts in sand or dirt.

This could result in damage to the bolt

and wheel hub threads.

1 2 ... 377 378 379 380 381 382 383 384 385 386 387 ... 463 464

Comments to this Manuals

No comments