Mercedes-benz R-Class 2010 Owners Manual User Manual download pdf (Page 81)

the door-mounted remote tailgate switch.

Monitor the closing procedure carefully to

make sure no one is in danger of being

injured.

To interrupt the closing procedure, press or

pull the door-mounted remote tailgate switch.

If the tailgate comes into contact with an

object while closing, the closing procedure is

stopped and the tailgate reopens. This may

happen if luggage has been piled too high, for

example.

X

Turn the SmartKey in the starter switch to

position 1 or 2.

X

Press remote tailgate opening/closing

switch : until the tailgate begins to close.

While the tailgate is closing an acoustic

warning sounds.

X

Interrupting the closing procedure:

Press or pull remote tailgate opening/

closing switch :.

Limiting opening height of tailgate

You can limit the opening height of the

tailgate in the upper opening range. This can

be useful, for example, when the space above

the tailgate is not sufficient.

Activating

X

Open the tailgate: Pull on handle

(Y page 75) or press and hold button

F on the SmartKey until the tailgate

opens.

X

Stop opening procedure: When the

tailgate is in the desired position, press

tailgate closing switch (Y page 77) or pull

on handle once more.

X

You can also press or pull the remote

tailgate opening/closing switch

(Y page 78) to stop the opening procedure.

X

Press and hold the tailgate closing switch

in the tailgate (Y page 77) until you hear a

short acoustic signal.

The opening height of the tailgate is limited.

The tailgate will now stop at the stored

position when opened.

Deactivating

X

Press and hold the tailgate closing switch

in the tailgate (Y page 77) until you hear

two short, consecutive acoustic signals.

Starter switch positions

SmartKey

G

Observe Safety notes, see page 55.

Starter switch

g

For removing SmartKey

1

Power supply for some electrical

consumers, e.g. radio

2

Ignition (power supply for all electrical

consumers) and driving position

3

Starting position

When you switch on the ignition, all lamps

(except low-beam headlamp indicator lamp,

high-beam headlamp indicator lamp, and turn

signal indicator lamps unless activated) in the

instrument cluster come on. If a lamp in the

instrument cluster fails to come on when the

ignition is switched on, have it checked and

replaced if necessary. If a lamp in the

instrument cluster remains on after starting

the engine or comes on while driving, refer to

“Lamps in instrument cluster” (Y page 299).

Starter switch positions

79

Controls in detail

251_AKB; 4; 52, en-US

d2ureepe, Version: 2.11.8.1

2009-03-23T09:22:52+01:00 - Seite 79

Z

1 ... 80 81 82 ... 364

Comments to this Manuals

No comments