114
Controls in detail
Locking and unlocking
Selective setting
If you frequently travel alone, you may wish
to reprogram the SmartKey with
KEYLESS-GO so when you grasp the driv-
er’s door handle only the driver’s door and
the fuel filler flap unlocks.
왘 Press and hold buttons Œ and ‹
simultaneously for about five seconds
until battery check lamp 5
(
컄 page 110) flashes twice.
The SmartKey with KEYLESS-GO will
then function as follows:
Unlocking driver’s door and fuel filler
flap
왘 Grasp the driver’s outside door handle.
All turn signal lamps flash once. The
locking knob in the driver’s door moves
up. The anti-theft alarm system is dis-
armed.
Global unlocking
왘 Grasp any outside door handle other
than the driver’s outside door handle.
All turn signal lamps flash once. The
locking knobs in the doors move up.
The anti-theft alarm system is dis-
armed.
Global locking
왘 Press lock button on an outside door
handle (
컄 page 64).
All turn signal lamps flash three times.
The locking knobs in the doors move
down. The anti-theft alarm system is
armed.
Restoring to factory setting
왘 Press and hold buttons Œ and ‹
simultaneously for about five seconds
until battery check lamp 5
(
컄 page 110) flashes twice.
!
If you can no longer lock or unlock the
vehicle with the SmartKey with
KEYLESS-GO, then the batteries in the
SmartKey are discharged, the
SmartKey with KEYLESS-GO is mal-
functioning or the vehicle battery is
drained.
앫 Check the batteries in the
SmartKey with KEYLESS-GO
(
컄 page 115) and replace them if
necessary (
컄 page 440).
앫 Use the mechanical key to unlock
the driver’ door (
컄 page 436).
Comments to this Manuals