Mercedes-benz 2012 B Class User Manual download pdf (Page 84)

Opening and closing

Overhead control panel

:

To open

;

To open

=

To close

X

Turn the SmartKey to position 1

or 2

in the

ignition lock.

X

Press or pull the 3 switch in the

corresponding direction.

i

If you press the 3 switch beyond the

point of resistance,

an automatic opening/

closing process is started in the

corresponding direction. You can stop

automatic operation by operating the

switch again.

Resetting the sliding sunroof and the

roller sunblinds

If the sliding sunroof or the roller sunblinds

do not move smoothly, reset the sliding

sunroof and the roller sunblinds:

X

Turn the SmartKey to position 1 or 2

in the

ignition lock.

X

Press the 3 switch to the point of

resistance in the

direction of arrow ; and

hold it until the sliding sunroof has opened

about 4 in (10 cm).

X

Pull the 3

switch

repeatedly

to the point

of resistance in the direction of arrow =

until the sliding sunroof is fully closed.

X

Keep the 3 switch pulled for an

additional second.

X

Press the 3 switch to the point of

resistance in the

direction of arrow ; and

hold it until the roller sunblinds are open

about 4 in (10 cm).

X

Pull the 3

switch

repeatedly

to the point

of resistance in the direction of arrow =

until the roller sunblinds are fully closed.

X

Keep the 3 switch pulled for an

additional second.

X

Make sure that the sliding sunroof

(Y page 81) and the roller sunblinds

(Y

page

82)

can be fully opened and closed

again.

X

If this is not the case, repeat the steps

above again.

Problems with the sliding sunroof

G

WARNING

If you do not reset the sliding sunroof after a

malfunction or voltage supply interruption,

then

the backing

up function will malfunction

or not work. The sliding sunroof closes with

increased or maximum force. Parts of the

body could be trapped in the closing area in

the process. This poses an increased risk of

injury or even fatal injury.

In such or similar situations always make sure

that no parts of the body are in the closing

area. Always reset the sliding sunroof after a

malfunction or voltage supply interruption.

!

If the sliding sunroof still cannot be

opened or closed as a result of a

malfunction, contact a qualified specialist

workshop.

Problem: the sunroof cannot be closed

and you cannot see the cause. If the sliding

sunroof is obstructed during closing and

reopens again slightly:

X

Immediately after it blocks, pull the 3

switch down again to the point of

82

Panorama roof with power tilt/sliding panel

Opening and closing

1 ... 83 84 85 ... 340

Comments to this Manuals

No comments