Mercedes-benz 2012 B Class User Manual Page 102

  • Download
  • Add to my manuals
  • Print
  • Page
    / 340
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 101
Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of
thick fog. Please take note of the country-
specific regulations for the use of rear fog
lamps.
X
To switch on the rear fog lamps: turn the
SmartKey in the ignition lock to position 2
or start the engine.
X
Turn the light switch to
L or Ã.
X
Press the R button.
The yellow R indicator lamp in the
instrument cluster lights up.
X
To switch off the rear fog lamp:
press the
R
button.
The yellow R indicator lamp in the
instrument cluster goes out.
Parking lamps
!
If the battery has been excessively
discharged, the parking lamps or standing
lamps are automatically switched off to
enable the next engine start. Always park
your vehicle safely and sufficiently lit
according to legal standards. Avoid the
continuous use of the T parking lamps
for
several hours.
If possible, switch on the
X right or the W left standing lamp.
X
To switch on: turn the light switch to
T.
The green T indicator lamp in the
instrument cluster lights up.
Standing lamps
Switching
on the
standing lamps ensures the
corresponding side of the vehicle is
illuminated.
X
To switch on the standing lamps: the
SmartKey is not in the ignition lock or it is
in position 0.
X
Turn the light switch to W (left-hand side
of the vehicle) or
X (right-hand side of
the vehicle).
Combination switch
Turn signal
:
High-beam headlamps
;
Turn signal, right
=
High-beam flasher
?
Turn signal, left
X
To indicate briefly: press
the combination
switch briefly to the pressure point in the
direction of arrow
; or ?.
The corresponding turn signal flashes three
times.
X
To indicate: press the combination
switch
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
X
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
pressure point in the direction of
arrow :.
In the à position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
100
Exterior lighting
Lights and windshield wipers
Page view 101
1 ... 101 102 103 ... 340

Comments to this Manuals

No comments