Mercedes-Benz 2002 C 230 Kompressor Operator's Manual download pdf (Page 282)

280

Operation

Engine compartment

Checking engine oil level with the

control system

When checking the oil level

앫 the vehicle must be parked on level

ground

앫 with the engine at operating tempera-

ture, the vehicle must have been

stationary for at least five minutes with

the engine turned off

앫 with the engine not at operating tem-

perature yet, the vehicle must have

been stationary for at least 30 minutes

with the engine turned off

To check the engine oil level via the

multifunction display, do the following:

왘 Switch on ignition (컄 page 33).

The standard display (

컄 page 121) should

appear in the multifunction display.

왘 Press button k or j on the

steering wheel until the following

message is seen in the multifunction

display:

One of the following messages will

subsequently appear in the indicator:

앫

Engine oil level

OK

앫

Add 1.0 qt engine oil

for max. oil level

(Canada:

1.0 l

)

앫

Add 1.5 qts engine oil

for max. oil level

(Canada:

1.5 l

)

앫

Add 2.0 qts engine oil

for max. oil level

(Canada:

2.0 l

)

왘 If necessary, add engine oil.

For adding engine oil see (

컄 page 281).

More information on engine oil can be

found in the “Technical data” section

(

컄 page 387) and (컄 page 390).

Other display messages

If the SmartKey is not turned to position 2

in the starter switch, the following

message will appear:

Switch ignition on to

check engine oil level

왘 Switch on ignition (컄 page 33).

i

If you want to interrupt the checking

procedure, press the k or j

button on the multifunction steering

wheel.

1 ... 281 282 283 ... 442

Comments to this Manuals

No comments