Mercedes-benz C-Class 2007 Owners Manual User Manual download pdf (Page 382)

381

Practical hints

Flat tire

왘 Unscrew the alignment bolt, install last

wheel bolt and tighten slightly.

Lowering the vehicle

왘 Lower vehicle by turning crank

counterclockwise until vehicle is

resting fully on its own weight.

왘 Remove the jack.

1 - 5 Wheel bolts

왘 Tighten the five wheel bolts evenly,

following the diagonal sequence

illustrated (1 to 5), until all bolts are

tight. Observe a tightening torque

of 80 lb-ft (110 Nm).

Before storing the jack, it should be fully

collapsed, with handle folded in (storage

position) (

컄 page 358).

왘 Store the jack and the other vehicle

tools in the trunk.

Warning! G

Only use genuine equipment

Mercedes-Benz wheel bolts. Other wheel

bolts may come loose.

Do not tighten the wheel bolts when the

vehicle is raised. Otherwise the vehicle

could fall off the jack.

Warning! G

Have the tightening torque checked after

changing a wheel. The wheels could come

loose if they are not tightened to a torque

of 80 lb-ft (110 Nm).

1 2 ... 377 378 379 380 381 382 383 384 385 386 387 ... 440 441

Comments to this Manuals

No comments