178
Controls in detail
Control system
In low ambient light conditions the
following lamps will switch on additionally:
앫 Parking lamps
앫 Tail lamps
앫 License plate lamps
앫 Side marker lamps
For more information on the daytime
running lamp mode, see “Lighting”
(
컄 page 143).
Setting locator lighting
With the locator lighting feature activated,
the exterior lamp switch in position U
(
컄 page 144) and the interior lighting in
automatic mode (
컄 page 151), the
following lamps will switch on during dark-
ness when the vehicle is unlocked using
button Œ on the SmartKey or SmartKey
with KEYLESS-GO*:
앫 Parking lamps
앫 Tail lamps
앫 License plate lamps
앫 Side marker lamps
앫 Front fog lamps
The locator lighting switches off when the
driver’s door is opened.
If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after approxi-
mately 40 seconds.
왘 Move the selection marker with
button æ or ç to the
Lighting
submenu.
왘 Press button j or k repeatedly
until the message
Surround Lighting
Function
appears in the multifunction
display.
The selection marker is on the current
setting.
왘 Press button æ or ç to switch
the locator lighting function
On
or
Off
.
왘 Turn the exterior lamp switch to
position U when exiting the vehicle.
The locator lighting feature is
activated.
i
For safety reasons, changing the setting for
the daytime running lamp mode is not possible
while the vehicle is in motion. The following
message appears in the multifunction display:
Settings
can only be made
at a standstill
.
For safety reasons, resetting to factory settings
(
컄 page 171) while driving will not deactivate the
daytime running lamp mode.
Comments to this Manuals