Mercedes-benz 2004 ML 500 User Manual download pdf (Page 219)

219

Operation

Engine compartment

Checking engine oil level via display

When checking the oil level the vehicle

must

앫 be parked on level ground

앫 be at normal operating temperature

앫 have been stationary for at least five

minutes with the engine turned off

To check the engine oil level via the display

in the speedometer, do the following:

왘 Turn the key in the steering lock to

position 2.

1 Button

2 Display in speedometer

왘 Wait until the display

------

appears in

the speedometer display 2.

왘 Within one second press button 1

twice.

One of the following messages will

subsequently appear in the display:

앫

OIL i.O

The oil level is correct. Engine oil

does not to be added.

앫

– 1.0 L

왘 Add 1.0 liter of engine oil.

앫

– 1.5 L

왘 Add 1.5 liters of engine oil.

앫

– 2.0 L

왘 Add 2.0 liters of engine oil.

For adding engine oil see (

컄 page 302).

More information on engine oil can be

found in the “Technical data” section

(

컄 page 300) and (컄 page 301).

Other display messages

If there is excess engine oil with the engine

at normal operating temperature, the

following message will appear in the

display:

OIL HI

The oil level is too high.

왘 Have excess oil siphoned.

!

Excess oil must be siphoned or drained

off. It could cause damage to the

engine and catalytic converter not

covered by the Mercedes-Benz Limited

Warranty.

1 ... 218 219 220 ... 344

Comments to this Manuals

No comments