Mercedes-benz S-Class 2009 User Manual download pdf (Page 576)

Flat tire

574

X

Turn crank 4 clockwise until jack 3 is

fully seated in take-up bracket 2 and the

jack base evenly meets the ground.

X

Jack up the vehicle until the wheel is a

maximum of 1.2 in (3 cm) from the ground.

Removing the wheel

1

Alignment bolt

X

Unscrew uppermost wheel bolt and remove

it.

X

Replace this wheel bolt with alignment bolt

1 supplied with the vehicle tool kit.

X

Remove the remaining bolts.

!

Do not place wheel bolts in sand or dirt.

This could result in damage to the wheel

bolts and wheel hub threads.

X

Remove the wheel.

Attaching the spare wheel

G

Warning!

Always replace wheel bolts that are

damaged or rusted.

Never apply oil or grease to wheel bolts.

Damaged wheel hub threads should be

repaired immediately. Do not continue to

drive under these circumstances! Contact

an authorized Mercedes-Benz Center or

call Roadside Assistance.

Incorrect wheel bolts or improperly

tightened wheel bolts can cause the wheel

to come off. This could cause an accident.

Be sure to use the correct wheel bolts.

G

Warning!

Only use genuine Mercedes-Benz wheel

bolts. Other wheel bolts may come loose.

Do not tighten the wheel bolts when the

vehicle is raised. Otherwise the vehicle

could fall off the jack.

Practical hints

1 2 ... 571 572 573 574 575 576 577 578 579 580 581 ... 615 616

Comments to this Manuals

No comments